Adding Printer to RDS computer profiles - PrinterLogic
Adding Printer to RDS computer profiles
Steps 1 thru 4: Adding the Printer
Step 1
Click the + R key to open the Run window. Type \\printers and click the OK button.
Step 2
Click in the Search printers window with the magnifying glass 🔎 (upper right corner)
Step 3
Type the office location (i.e. 51_is) to pull up a list of printers in the the desired office.
Step 4
Highlight the desired printer, right click and click Connect..
Repeat the above steps to add additional printers. Continue to steps 5 thru 7 on page 2 to verify and set the default printer.
Steps 5 thru 7: Verifying the printer and setting default
Step 5
Right click on the Start Menu and select and click on Control Panel
Step 6
Click in the Search Control Panel window with the magnifying glass 🔎 (upper right corner) and type printers
Click on Devices and Printers
Step 7
Verify the desired printer is listed in the Printers list and the default printer has a green check mark on it. If not, right click on it and select Set as default printer